Laptop shell stamping connection project plan
LIGENT robot punch machine loading and unloading project, robot body and robot gripper, manufacturing, installation, debugging turnkey project, as well as robot-related personnel training and after-sales maintenance
1.Product name: Laptop shell
2.Thickness of sheet: provided by customer
3.Film length: provided by customer
4.Sheet width: provided by customer
5.Sheet weight: provided by customer
6.The shape of the workpiece is as shown below


System main power supply: three-phase four-wire system, voltage: AC 220V±10%, frequency: 50Hz, capacity: 10KVA
Working air pressure: not less than 0.6Mpa, flow rate: not less than 0.5 cubic meters/min
System installation environment:
a. Temperature: 0-45℃
b. Humidity: usually 20%~75%RH (no condensation), short-term below 95%RH (no condensation)
c. Vibration: below 4.9 m/s2(0.5G)
d. Ground load: 7t/m2
e. Total grounding resistance value: no more than 1 Ω
f. No hidden dangers from flammable, explosive or corrosive gases or liquids